Question:
Hi, I have two questions. 1. Are the seals compatible with mineral oil? If not, is there an optional kit for it?2. What is the piston diameter in that M/C?
July / 20 / 2016
Answer:
1) No, only DOT42) 14mm
Question:
Hi,Can I use this for LHRB(left hand rear brake)?
August / 15 / 2016
Question:
Sir,Brembo 14RCS break comes with reservoir and brake hoses are fits for my Kawasaki Ninja 300-2016 model.
July / 28 / 2017
Answer:
Good Morning, you need to buy reservoir kit 110A26385. To install 14RCS with OEM brake line you need adapter 170101
Question:
Sir,Thanks Brembo 14RCS which Rizoma fluid tank fits as reservoir kit. we may use spiegler or which break line to be used.This 14RCS may be used as clutch for my Kawasaki Ninja 300-2016.
July / 29 / 2017
Answer:
This is a LEFT HAND master cylinder, you can't install on your motorcycle. Our previous answer was related to the RIGHT hand (your wrote "break" then we understood you meant brake and for right side).
Question:
can his fit a aprilia rs4 125 ?
October / 10 / 2017
Answer:
At left side RS4 has a cable clutch not a master cylinder, you can't use it.
Question:
Hello, can I use the 14RCS for clutch master cylinder on my ducati 996,year 1999.?Or I need 16 RCS.Thank you for answere.
February / 10 / 2018
Answer:
No, you must use 16RCS.
Question:
can i use these levers on my ktm 85 in order that the force required to break or operate the clutch is reduced
March / 27 / 2018
Answer:
No, for two reasons: First KTM 85 use a 10mm piston diameter master cylinder, if you use a 14mm master cylinder it will be 40% bigger then the lever will be very hard to move (google Pascal theory and you will have the confirm). Second I guess tha master cylinder slave works only with mineral fluid.
Question:
I have 1998 Ducati Monster 400 Carb. Which RCS should I use for my clutch and my brake?
April / 09 / 2018
Answer:
Hi, for brake you can use 15RCS. For clutch it depends of the measure of your clutch master cylinder. You will choose the measure nearest the OEM master cylinder, I guess the stock mc is about 11 or max 13mm so far no more than 14mm RCS.
Question:
I ride yamaha Xmax 300 scooter. This masterpump for the left side right? Then for right side the front brake, what size should i used.
April / 16 / 2018
Answer:
The 14RCS for Right, pn 110A26345
Question:
Hi i have a yamaha xmax 300 single disc scooter. 14rcs for left side and what size should i use for right side if i intend to install a p4 caliper?
May / 19 / 2018
Answer:
You can use 14RCS right side (pn 110A26345) or a 15RCS .
Question:
Hi,when i use 14RCS in TMAX 530 (15),any parts i should buy?ep:Bracket + Reservoir Mounting Kit for Brembo RCS Clutch Master Cylinder
June / 05 / 2018
Answer:
Hi, you need line adapters 170101 (1 adapter for 1 MC) and reservoir mounting kit 110A28385 for front brake and 110a26386 for rear brake.
Question:
For Tmax 2018 DX can dis be used for the left side break?? Will it effect the cruise control of were to install this??
November / 18 / 2018
Answer:
Yes you can use for left side brake. This master cylinder is NOT supplied with a switch, if you need this feature just add to your cart brake light switch 10x1.0 mm.
Question:
For Tmax 2015 iron max abs can dis be used for the left side break?? Will it effect the cruise control of were to install this??
March / 08 / 2019
Answer:
You can install on left side. This master cylinder is NOT supplied with a switch, if you need this feature just purchase brake light switch 10x1.0 mm .
Question:
Hi,when i use left 14RCS,right19RCS in TMAX 530 2015 iron max (abs),any parts i should buy?ep:Bracket + Reservoir Mounting Kit for Brembo RCS Clutch Master Cylinder
March / 08 / 2019
Answer:
You need to change everything, then bracket, reservoirs, brake lines. You can choose for example 19RCS premium kit + clutch mounting kit 110A26386 and order custom made brake lines.
Question:
Can this fit Yamaha XMAX 300 ABS? And is this front and rear brake lever already or they are sold separately?
May / 30 / 2019
Answer:
This part is for left side, can be fitted to your scoother as replacement of the left side master cylinder only.
Question:
Have a Piaggio Medley 150 ABS (Y`2019) is this Brembo will fit on my Paggio?
June / 16 / 2019
Answer:
How can you install ? the oem master cylinder is covered by the headlight fairing. We can't confirm so far.
Question:
Currently using brembo P4 4piston caliper what master cylinder do u recommend?thanks
August / 06 / 2019
Answer:
Use 15RCS or 16x18.
Question:
My bike is honda sh 150 abs using nissin 3 pistol STD-336. Does 14rcs fit ? or I have to use 15, 16 ?
September / 28 / 2019
Answer:
14RCS is the right choice.
Question:
Hi, may i have your recommendation for which RCS system for Left and Right on Xmax300 ABS 2019 please. Thank you souch for your kind input. Ciao.
January / 16 / 2020
Answer:
14RCS is the right choice.
Question:
For Xmax300 abs, left side 14rcs, what about right side? Thank you
January / 16 / 2020
Answer:
For Both sides 14RCS are coorect. 110A26365 is for left, 110A26345 for right .
Question:
Hi.Ktm 450smr.Can I use it for a 14rcs clutch?
July / 06 / 2020
Answer:
You can't, keep the stock clutch, if you use a 14mm the clutch lever will be too hard to pull .
Question:
Hi I'm using P2 34 caliper for rear brake to my yamaha XMAX..which is the best performance for that?RCS14 or RCS16?thank you..
July / 14 / 2020
Question:
I want to install it on the left side of the BMW C600, what other related kits do I need?
August / 01 / 2020
Answer:
You need new brake line or adaptor and you need a reservoir kit as well.
Question:
I want to install it on the left side of the BMW C600,What do I need in the website? Can I provide the part number?
August / 02 / 2020
Answer:
We do not have a list of the part numbers, because the mod you want to do should be checked with the scooter on site. We might suggest to use the reservoir kit 110A26386 + switch 0626MQ20 + adaptor 170101, please check with your mechanic before placing the order .
Question:
Hello, can this masterpump support an M50 4 Piston?
November / 08 / 2020
Answer:
ONE M50 ? Yes sure it will work fine.
Question:
Hi,I want to use two 14 RCS brake MC on my motorcycle. The left side handlebar will be for rear brake caliper Brembo P34. The right side handlebar will be for front Brembo P34. Front and rear calipers are the same Brembo P34. Can the Brembo 14RCS clutch MC be used as a brake lever for left handlebar location, rear Brembo P34 brake caliper?
November / 22 / 2020
Answer:
Yes, you can use this mc as brake or clutch. Many scooter riders already use it .
Question:
Could you please recommend between this 14RCS and 15RCS for 220mm single disc with one floating caliper 2x25mm pistons, supermoto pitbike asphalt circuit racing. Thank you!!
February / 09 / 2021
Answer:
Between 14 and 15 we do not recommend any. Please note the braking won't be modulable. You need a smaller size master cylinder.
Question:
Hello, is this the ok part for moto guzzi stelvio - 2008 clutch master cylinder replacement or should I get the rcs16? The original clutch lever is hard to pull.
June / 21 / 2021
Answer:
The stock mc is 12mm. The bigger will be the diameter the harder will be to pull. WE don not recommend to use a 16RCS so far, 14RCS would be enough (please note the lever will be harder to pull)
Question:
Do you have this in short version?
July / 07 / 2021
Answer:
Not produced by Brembo.
Question:
Do I need any adaptors fitting this as a clutch to my '19 KTM 690 SMC-R
July / 14 / 2021
Answer:
You ca,'t use it. Your clutch is a 11mm. If you use this one ypu will NOT be able to pull the lver, it will be too hard to.
Question:
I have a KTM Super duke r 1290 2018, will this item fit? Your check stats it will but I don't see it on brembo website when searching by my bike.If it fits, what other components do I need to install?
October / 15 / 2021
Answer:
Your stock clutch master cylinder piston is 12mm, therefore this is the only available size to mount. You may need a reservoir bracket.
Question:
I am looking for the right setting to a recently modified Vespa 300 GTS/GTV.The FRONT caliper replaced to BREMBO P4 3034 and REAR caliper to P2 34.Would like to install BREMBO brake levers, but I am uncertain with the right size and fit for this setting.What would be your recommendation of setting here?RCS 14 Break - RCS 14 Brake and ClutchRCS 17 Break - RCS 16 ClutchRCS 17 Break - RCS 17 ClutchRCS 19 Break - RCS 16 / 17 Clutch
April / 22 / 2022
Answer:
We recommend 14RCS for both sides, or 15RCS for Right and 14RCS for Left. Vespa has a small diameter tire, then it is better to brake smoothly than have too much power.
Question:
Are the dimension on the 15RCS and 14 RCS the same?What would be your preferred choice? What should the main difference be here between the 14RCS and 15RCS?
April / 25 / 2022
Answer:
15RCS is a 15mm diameter mc, 14RCS is smaller then less powerful. Our personal choice will be for street riding 14+14 , for race / sport most riders would like 15RCS + 14RCS
Question:
I want to upgrade my brake sistem for X-max 300. Brembo P4 34 front + P2 34 rear. What brake pump should i use: 14RCS or 17RCS. Also the disks were changed with bigger ones (normal not floating). Thanks
May / 09 / 2022
Answer:
You can use 14 or 15 RCS for front brake, 14RCS for rear brake.
Question:
how can i install micro switch on this 14rcs Brake/Clutch master cylinder
July / 30 / 2022
Answer:
This master cylinder is NOT supplied with a switch, if you need this feature just add to your cart brake light switch 10x1.0 mm
Question:
Hi. I want to use this as clutch master on my KTM Duke 690 R from 2018. My current clutch is with a 11 mm piston.what do I need besides the reservoir pack?KindlyRune
November / 11 / 2022
Answer:
Oem axial master cylinder brakes hoses could not fit radial mc, we can supply specific brake hoses or the adaptor part number: 170101 .
Question:
Hi. I want to use this as clutch master on my KTM Duke 690 R from 2018. My current clutch is with a 11 mm piston.what do I need besides the reservoir pack?KindlyRune
November / 13 / 2022
Answer:
You need a new clutch line or radial adaptor.
Question:
I have Brembo front caliper M4, Brembo rear caliper 2-piston/34mm (20516550) and Brake Disc ZELIONI Type III, Ø 220/105mm on a scooter. Can I use the Brembo Brake Master Cylinder 110A26345 Right and 110A263665 Left ?
May / 06 / 2023
Answer:
1 front M4 caliper: use 110A26345 (14RCS) or 15 RCS . For Rear use 14 RCS 110A263665 .
Question:
Will this fit my KTM super duke r 1290 2022 please? Any other accessories needed? Thanks
May / 12 / 2023
Answer:
Thank you for contacting us through our website. Yes We confirm this part is correct. You may need a reservoir bracket and a banjo M10x1mm bolt.
Question:
Hello. Does the rcs14 work if my original clutch is 1/2? My motorcycle is a Yamaha Super Tenere 2020. I recently bought the RCS17 instead of the RCS14. Can I use the rcs17 left side rotated as a right side brake master cylinder? Is there any problem in its operation?
December / 15 / 2023
Answer:
1/2 = 12.7mm, the max diameter we recommend for clutch is 15mm, threfore 14RCS or 16RCS .
Question:
Hello, would you recommend this product to upgrade the 2017 Yamaha r3 front brake master cylinder ?
February / 14 / 2024
Answer:
Hello, this is master cylinder is left side therefore you can't use on a motorcycle as brake master cylinder.
Question:
Hello and thank you for the best shop ever!Would 14rcs work for the clutch cylinder and 19rcs for med master brake for my Ducati monster 1100s 09?
March / 11 / 2024
Answer:
We recommend 16RCS + 19RCS .
Questions & Answers placed here are related to the nature of this product, how it works, where it works, if it is useful etc etc, if you need help on another part please do not place your question here but inside its page.
This is not either the right place where to ask for price, availability, delivery, shipping, for this info click on "MyCarpiMoto" and then "Contact" at the top of the page.
Your Privacy: Do not add any personal information inside the question box, such as name, email, phone, everyone would read it; to protect your privacy, every question which includes personal informations is by default canceled.