Question:
Hi,Will this work well on a 2000 Monster 900? I want a lot more stopping power!Thanks
January / 11 / 2019
Answer:
Yes, it would improve braking. But you might check the calipers, check the seals, the more power could cause over pressure.
Question:
Hi I have a Yamaha FZ1 07' it has twin disks braking system carrying floating calipers, but you recommend the 17RCS, should I not take the 15RCS for this bike?Looking forward to hear from you.Best regards.Nis
April / 10 / 2019
Answer:
15RCS diameter is too small for your bike. The correct diameter is 17mm or above 17mm.
Question:
Hello,I have an Honda CB* 600 F PC31 (F3) 1996. I would like to upgrade the orignal axial master cylinder 12mm by a radial MC. But I am not sure which size I must select, between a 15/16/17. I dont think bigger size like 18 and 19 would work, just too big for my olde calipers ( 2 pistons - 25mm). Any advice welcome, as I want to be sure to be the right MC. Thanks, regards, André
March / 07 / 2020
Answer:
PC31 = CBR600F , as far we know the master cylinder is 14mm, You can use 15RCS or a 16mm axial.
Question:
Hi, would you recommend this master cylinder work with the Brembo M4 34mm calipers on the Ducati 848/1098, or would the 19mm be preferable? Many thanks.
September / 29 / 2020
Answer:
M4 34 requires 19mm master cylinders.
Question:
I’m considering ordering a 17RCS for my 2017 Aprilia Tuono 1100 RR. I see it’s compatible on your site and I’ve read everything on the page for your kit number RCS17PKB, but I’m not sure I need all the parts in this kit for my application. Do I need the micro switch wiring harness for my application? I’m pretty sure I only need the standard banjo bolt and I have a new aluminum reservoir so I don’t need those parts either. Can you tell me which individual parts I need for my bike and if I can order just those parts from you? Thanks!
January / 25 / 2021
Answer:
Do I need the micro switch wiring harness for my application? A: Brembo does not produce any motorcycle specific harness, you would simply adapt the Brembo wires. Botlt: as far we know you don't need it because the stock bolt is already compatible, if you have any doubt check if the oem bolt is already M10x1mm .
Question:
Hi, does this come with a mirror mount?
March / 01 / 2021
Answer:
No, it does not come with mirror mount.
Question:
Hi, I have a 2019 suzuki gsx s 750, its an ABS model. Would this work or a rcs 15? I'm finding conflicting information on this everywhere. Please can you help.Much appreciated. Thanks
March / 10 / 2021
Answer:
You can use both 17 or 19, we asked Brembo, they replied "we recommend 19mm" .
Question:
Hi, i have a 2018 Yamaha MT 09 SP, will this fit my bike and oem brake lines and bolt?How about mirror clamp, is it possible to buy one?It comes with stop switch that i need to adapt isnt it?
May / 14 / 2021
Answer:
Stock brake lines won't fit. Mirror clamp is available , listed inside the page.
Question:
Will the RCS17CCPKB or this unit the RCS17PKB work on a 2019 Honda CB650R ABS?
October / 21 / 2021
Answer:
17mm diameter master cylinder is the correct size for a sport upgrade on your CB650R .
Question:
Do the RCS 17 work on a Yamaha R6 2008 with Galfer Braded brake lines?
November / 05 / 2021
Answer:
It is compatible with stock caliper but not with lines for axial stock master cylinder.
Question:
Hey!which radial master do you recommend for multistrada 1000ds? caliper is p4 30/34 original?to the M50 caliper I see that rcs 17 is recommended.p4 30/34 has a larger piston diameter, fits rcs17 or possibly rcs19?regards Johan
November / 08 / 2021
Answer:
Stock mc is a PSC 16, therefore the natuarl upgrade is a 17mm mc
Question:
Can I use the RCS17 premium kit with a 2019 Ducati monster? Any additional parts required? Thank you in advance.
January / 06 / 2022
Answer:
Your question does not specify which model, Monster are available in different engine sizes and different set up, we can't answer
Question:
Hello. Can I use the RCS17 premium kit with a 2019 Ducati monster 821. I will be using the stock calipers. Any additional parts required? Thank you in advance.
January / 06 / 2022
Answer:
Thank you for contacting us through our website. Yes We confirm this part is correct. You need also a mirror clamp and new brake lines or the radial adaptor Part Number: 170101
Question:
Hi, which radial MC to install on Tuono V4R 2012 APRC, non ABS? RCS 17 or RCS 19? Thanks
January / 21 / 2022
Answer:
Thank you for contacting us through our website. We confirm that this product is compatible with your motorcycle. If you use the 'Compatibility with my bike' tool you can check it by yourself, and you will also get useful tips to search for other compatible parts. You can also find products compatible with your bike by filtering the site for your model year, you can also extend or limit the search using the filter by manufacturer or by category. NB: the '-' symbol before or after a year indicates 'up to the model year' or 'starting from the model year'.
Question:
Hi, are there any things i need to order besides the master cylinder and Reservoir for my 2020 Yamaha r1? Do I need to get another brake lines?
February / 12 / 2022
Answer:
Yes you need brake lines or radial adaptor.
Question:
Hi,I would like to upgrade brakes on my Suzuki Bandit GSF1250. It have 2 Tokico callipers 4 pistons each. Pistons diameter 27/30. Original master cylinder has 14mm piston. What do you suggest to improve braking RCS17 or RCS19? I use motorcycle mostly for commuting and touring and don't want lever too hard to press.
February / 27 / 2022
Answer:
The right diameter should be 16mm, a 16mm axial will improve braking, for example the Nissin 16mm. Moving to Radial the right choice for daily use would be 17RCS .
Question:
Hello. I have Tuono V4 Year 2020 with brembo M50 callipers and ABS. Is RCS 17 ok?Thanks.
March / 07 / 2022
Answer:
Thank you for contacting us through our website. Yes We confirm this part is correct.
Question:
Hi, i wanted to know what you recommend as a good master cylinder for a 2007 SV650. Bike has stock calipers, and is used as a trackbike only. Thank you in advance
April / 04 / 2022
Question:
Hello, I have a Yamaha FZ6-N from 2007. It has twin disc in the front, 4 pistons per caliper. Per caliper, 2 pistons have 30mm diameter, 2 pistons have 27 mm diameter. Will the RCS 17 work on this setup? Thank you very much in advance!
April / 12 / 2022
Answer:
YES. All the Yamaha calipers are similar, the caliper that mounts Brembo 07YA23 pads or SBS 634 should use 17mm master cylinder.
Question:
Will it fit my mt07 2016 abs? What else do I need to upgrade to make it work?
May / 01 / 2022
Answer:
You need a new set of brake lines or the radial adaptor
Question:
Hello everyone, I'm trying to figure out wich is the best option for my Honda CB650R 2019 Neo Cafe Racer...Should I use 19RCS or 17RCS? Thanks
May / 20 / 2022
Answer:
17RCS or any radial 17mm brake master cylinder
Question:
Hi, I have a question, my 2022 Suzuki GSXS1000 should go for RCS 19 or 17 with original brembo calipers
May / 23 / 2022
Answer:
On Suzuki GSXS1000 and Suzuki GSXS950 you can NOT mount any Brembo RCS because the right switch is too "fat" then the lever won't run the full stroke = you can NOT brake = You can not stop.
Question:
Hi, I have a 2007 cagiva raptor 650ie, would this master cylinder be considered an upgrade over the stock master cylinder for street use? Thanks!
January / 16 / 2023
Answer:
Your single P4 30/34 calipers works with 14 / 15 mm master cylinders. Max 16mm. Over the braking will be too strong on lever
Question:
Hi, I have a 2007 cagiva raptor 650ie, would this master cylinder be considered an upgrade over the stock master cylinder for street use? Thanks!
January / 16 / 2023
Answer:
Correct, TWO Brembo P4 30/34 calipers works with 16 / 17 mm master cylinders. Since 17mm is a measure that in 2007 was not produced, many riders installed also 19mm. 17mm will be a remarkable upgrade .
Question:
Hello,I have a Husqvarna 701 Supermoto 2022 with a Brembo Monobloc calipers, I think with 34mm Diameter of the pistons. Only one disc 320mm. Should I use a 17RCS?Best regardsThomas
March / 09 / 2023
Answer:
You can use 15RCS, 16x18, 17RCS . For track use we recommend 16x18 .
Question:
Hi, I’m looking to upgrade my braking system front and rear top to bottom and clutch Lever ect what will work with my ‘2021 MT09 SP’ Many thanks
March / 16 / 2023
Answer:
Thank you for contacting us through our website. We confirm that this product is compatible with your motorcycle. Use 17RCS for front brake, for rear brake Brembo does not produce any upgrade. For clutch: If you use the 'Compatibility with my bike' tool you can check it by yourself, and you will also get useful tips to search for other compatible parts. You can also find products compatible with your bike by filtering the site for your model year, you can also extend or limit the search using the filter by manufacturer or by category. NB: the '-' symbol before or after a year indicates 'up to the model year' or 'starting from the model year'.
Question:
hi what size is the mount for handle bars on the Radial Brake Master Cylinder Brembo 17RCS Premium Kit Black. My handlebars on my harley are 1 inch , do u have this if so please send me the k and Ill order immediately thanks Greg
August / 02 / 2023
Answer:
All the master cylinder on our site clamp on 22.1mm bars EXCEPT when stated that clamp on 1 inch. For Example Brembo produces two 1 inch BRAKE master cylinder : 19RCS part number 110A89710, 15RCS part number 110A89730 , AND one and only 1 inch CLUTCH master cylinder : 19RCS part number 110A89770. The " 110A89770 - Radial Clutch Master Cylinder Brembo 19RCS for 1 inch handlebars (HD), Fold-Up Lever, 18-20 ratio " is the typical master cylinder to use on Harley . Please note that the bigger the piston is the harder the lever will be, therefore if you are looking for a smoother lever this mc won't be your solution .
Question:
Hi, I´m interested in upgrading my brakes to Brembo on a HONDA CBR650R 2020. The Radial Brake Master Cylinder Brembo 17RCS Premium Kit Black, is suitable for my bike correct? I would also like to have a matching clutch lever (BREMBO), what would you suggest? Thank you in advance.
August / 23 / 2023
Answer:
Thank you for contacting us through our website. Yes We confirm this part is correct. Brembo right now does not produce a clutch lever for CB650R
Question:
Hi, there!I'm considering ordering a 17RCS for my 2023 XMAX300.Is it available for both RIGHT and LEFT side?Thank you :)
September / 07 / 2023
Answer:
17RCS is available for both Left (pn 110A26355) and right (pn 110A26340) .
Question:
I have a 17rcs. I have a 2017 africa twin. what do I need to make it work?
September / 12 / 2023
Answer:
It won't fit unless you remove the handguards, change the brake lines (or add universal adaptor), add a mirror clamp.
Question:
Hello, i own a 2023 Yamaha MT09SP and i plan to upgrade the brakes with this master cylinder + braided lines 142170-2PR + pads initially. If this is not enough, i wan to swap the calipers also with Brembo can you please tell me if those braided lines will fit the new Brembo calipers or do i need anything else. Are all of those elements plug and play or do i need anything else for the initial setup? Thank you
January / 12 / 2024
Answer:
For initial set up you can purchase the parts you listed + mirror clamp. We think it will be a good set up if you either choose Sport pads. Calipers with stock brake lines: we can't answer because we do not know which caliper, btw probably they will not fit in any case on new calipers.
Question:
Hello, will it work with my 2019 KTM Duke 790, will I have to upgrade any additional parts?Thanks!
March / 27 / 2024
Answer:
Your stock master cylinder is axial, therefore you need new brake lines or radial adaptor, you need also a mirro clamp.
Question:
Aprilia Tuono V4 Factory from 2021 and onwards here.I'm looking to upgrade my brake cylinder but Have trouble figering out wich is the best.The RCS 17 or RCS 19? My calipers and brake lines are all still standard and some are saying the 17's are designed for them and others are saying the 19's are better. Would love to know a correct opinion.Thx in advance.
March / 30 / 2024
Answer:
It is not our opinion, for your Tuono, Brembo recommends 17mm master cylinder.
Questions & Answers placed here are related to the nature of this product, how it works, where it works, if it is useful etc etc, if you need help on another part please do not place your question here but inside its page.
This is not either the right place where to ask for price, availability, delivery, shipping, for this info click on "MyCarpiMoto" and then "Contact" at the top of the page.
Your Privacy: Do not add any personal information inside the question box, such as name, email, phone, everyone would read it; to protect your privacy, every question which includes personal informations is by default canceled.